How to Paint a Room

A great way to obtain a fresh look in a room is by painting it, by changing the color, the texture or the finish you can change the whole vibe. It’s impressive to think that such an easy job can have such an impact in your room so follow this how-to guide and become an expert.
Firstly, you need to do some choosing… Which color do you want, what finish do you want, what pattern do you want, where do you want to paint, which texture do you want to achieve…? Those and many other questions need to be answered for you to get hands on and do the job, but the deciding is the hard part, once you’ve done that part the following steps will guide you through the fun part.

How can we help you?

We at SimplePlan are here to help if you have any questions.

Essentials

Optional

  • Sandpaper
  • A flat scraper tool

PREPARATIONAL STEPS

1. Get the Room Ready

We recommend you move as much furniture as possible from the room, if there are any objects that can’t be moved, then we recommend you to cover them up with plastic (trash bags) or cloth (old bedsheets/canvas sheets).

Once you’ve covered those objects, it’s better to play it safe and secure them with tape, that way you can be sure that they will be covered up perfectly for you to focus on the important part: painting.

2. Cover up the Imperfections

If you want to achieve an even finish, then any holes from wall art or light fixtures need to be covered up. This is done by taking a small amount of filler with the edge of your scraper, holding it at a 45-degree angle against the wall and applying it to the hole. Then, by holding the scraper at a 90-degree angle against the wall, remove the excess.

Once you’ve done that, wait for it to dry off (each filler has its own drying time), afterwards, smooth to perfection your wall by using the fine sandpaper.

3. Wash your Wall

Using your damp sponge wash your wall with sugar soap or diluted washing up liquid. This will make the paint last longer and look better, so it is worth doing. Just wash and wait for it to dry off.

4. Tape

Use your tape (painter’s tape or masking tape) around the edges, cover up anything you don’t wish to paint (light fixtures (REFERENCE), doors, plug sockets…)

PAINTING STEPS

1. Patch Prime the Holes

This step isn’t necessary of you’re painting onto existing paint. But if that isn’t your case then if would be great if you dilute some of the chosen paint to patch prime the holes that you’ve filled by covering the imperfections.

2. Mix It Up

Stir your paint in a paint kettle for about 3 minutes as that will ensure you that is has been properly mixed.

3. Paint

You can let loose and paint as you wish, but if you want a technique then it would be recommended to star off by doing the edges delicately as that will frame your space; then, you can take your roller and give the whole wall a coat by doing a v-shaped motion.

4. Wait for it to Dry

The drying process can take up to 6 hours, but you can help the process by adding a fan to the room.

5. Repeat

Do the same v-shaped motion when doing as many coats as necessary.

6. Wait for it Dry

The drying process can take up to 6 hours, but you can help the process by adding a fan to the room.

AFTER THE PAINT JOB

1. Remove the Tape

It’s time for the most satisfying part of it all: the tape removal. Have fun with it!

2. Uncover your Furniture

Take off the plastic/cloth off your furniture, sit down and take in what you’ve done. Your room has a fresh new look all thanks to you!

Want to put these and other bright ideas into action?